Key Blanks For Your Truck
All truck key blanks all in one location. Simply select the manufacturer of your vehicle from the left column and view all possible key blank options.
They look like keys made of metal however, the top is made of plastic, and houses the transponder. Truck drivers prefer these keys. They reduce the chances of theft by reducing the possibility of accidental duplication.
Transponder Keys
A transponder key, also referred to as a chip-key, is fitted with a microchip which transmits an unique code signal each time it is inserted into the ignition. The car's computer system then examines the code and then starts the engine if it is in line with. This technology is a step forward in anti-theft and is available on almost every modern vehicle manufactured over the past 20 years.
It is recommended to replace your transponder's key as soon as you can If you find that it's not functioning correctly. A malfunctioning chip will stop the vehicle from running because it is unable to transmit the correct signal to its computer. You'll end up in a hazardous or awkward location, and it may also cause damage to other components of your car, which could lead to costly repairs.
When a transponder's key begins to malfunction, it can show warning indicators on the dashboard of the vehicle. These may include warning and error messages lights, which are helpful in determining what the problem is. A professional locksmith for cars with expertise in transponder keys will help you determine the cause of the issue and ensure that the issue is fixed before you are stuck on the side of the road.
A transponder key may not function due to physical damage or a problem with the programming. These problems can be difficult to determine and require you to visit an expert in order to solve the issue. It is crucial to find a local automotive locksmith who has experience with transponder keys, as they will be able to repair or replace them faster than a dealership for cars.
Non-transponder key heads are an aluminum flat piece. The key cuts are aligned to the tumblers on your ignition and held in place with spring-loaded clips. The keys can be cut by any qualified locksmith for automotive use, and they usually cost less than a transponder key. However, they are not as secure or secure as transponder keys, and there is a higher risk of unauthorized duplicates or theft.
VATS Keys
In older GM vehicles and trucks VATS keys were fitted to increase security. The keys work by using an embedded resistor to verify that you're using the correct ignition key to begin the vehicle. The key can also be used to shut down the motor if the incorrect key is used. This makes it more difficult for thieves to take the vehicle and deters them from doing so.
truck key cutting was introduced in 1986 with the Corvette and was soon rolled out to other GM cars. Its simplicity and efficiency allowed GM to decrease the theft rate of popular vehicles. Later, more sophisticated systems like transponder keys were made available.
Each VATS key has a resistor pellet in the key blade. It contains one of fifteen different VATS codes (resistance values). The VATS control module sends an electric current to the pellet when the key is placed in the ignition switch. This determines the resistance or vats code of the key and sends signals to the starter and fuel pump that it is a legitimate mechanical key.
Two leaf contacts are situated in the lock cylinder. They connect to the VATS pellet. The two wires, black/purple/white connect them to the ignition control module. The wires could break or become disconnected because of the constant flexing required to operate the lock-cylinder. The circuit also contains the two-wire connector at the base of the steering column. The connector could fail due to wear or moisture, or pressure.
The resistance of the key pellet can be measured by putting the ohm leads of an tester across the resistor, and then reading the Ohms. The ohms are then matched with the vats code on a VATS chart. This can help locksmiths determine the right VATS key blank to cut if customers require a replacement key. This is also known as VATS relearn. The same process can be used to reset the Passlock or Passkey on GM vehicles. This is a simple, but time-consuming process that requires the right tools.
Key Fobs
A key fob is a small, compact electronic device that replaces the physical key that you use to unlock your car. The fob is fitted with an RFID chip that can transmit an individual code that unlocks the door locks. The fob can also be programmed and can be configured to allow certain users access, while preventing others from entering. Fobs are commonly employed in commercial settings for controlling parking spaces' access and automating the process of opening or closing gates and doors.
Batteries for fobs need to be replaced on a regular basis. Batteries can be bought online, at big box retailers and hardware stores. You can change the battery yourself If you're skilled. You can find all the details in your owner's manual, or you can view YouTube videos that explain the process in a simple manner.
It is best to go to your dealer if you require an alternative fob for your vehicle. Based on the make and model, you may need technical expertise only available at the dealership's service center.
Fob technology is evolving and the latest smart fobs are able to provide a range of additional capabilities. Some fobs, for example can combine a short-range signal to open a door, and long range signal to open a parking gate into one device, removing the need for separate devices. The fobs could also have multiple buttons and LED indicators that let you know whether the fob is inactive or active.
Advanced fobs also utilize encryption and other security measures to safeguard against attacks by hackers. Older fob credentials that aren't encrypted are cloned and copied however newer fobs employ rolling codes that generate and transmit a distinct code every time you press the button. The constant change of codes makes it difficult for malicious actors to copy or hack fobs.
Some smart key fobs are compatible with smartphones and communicate with IoT devices to offer more automated functions. A smart key fob, for instance, can communicate with the smart thermostat or home security system to adjust according to your commute and location.
Keyless Entry
Keyless entry is a convenient feature that eliminates the need to insert your keys. Press the button on the fob of your key and you will be able to quickly unlock your vehicle. This feature is especially useful for companies that have large fleets, since it provides greater efficiency and ease-of-use.
Enhanced security is another benefit of this technology, since keyless entry systems typically have advanced encryption techniques that make the signal impossible to penetrate. This can make it more difficult to steal, especially when combined with other security features such as GPS tracking. This can also be a boon for fleets that manage their vehicles through integrated software since it gives an accurate view of the location of every vehicle at all times.
Kits for passive keyless access are available from VAIS Technology to equip virtually any vehicle model with passive keyless access. This lets the driver secure their vehicle before they touch a handle, turn their lights on when they approach, or turn on any of the other electronic accessories that can be activated by proximity.
Keyless entry is not an fad, but it's part of modern automotive technology. It's evident that remote start and keyless entry are commonplace features on 62% of new automobiles. It's important to remember that your key fob can be stolen if not secured in a secure manner. It is recommended to store your key fob in a signal-blocking pouch or box when not in use, and to store it in a garage or another secure place.